Zambia hints at fifth telco operator

A fifth telco
for Zambia?

Enough room says
industry regulator.

Wednesday, Feb 26th

SD-WAN – the ins, the outs and the whys

SD-WAN – the in's, the out's and the why's

Software-Defined Networking in a Wide Area Network (SD-WAN) is emerging as a mainstream technology and is seeing increasing global adoption as organisations seek to optimise cost and streamline access to cloud applications.

The technology enables organisations to build higher-performance WANs using lower-cost and commercially available Internet access, by partially or wholly replacing more expensive private WAN connection technologies, such as Multiprotocol Label Switching (MPLS), or to introduce a second or third application hub into the traditional hub-and-spoke WAN topology.

SD-WAN technology connects enterprise network end points, including branch offices and data centres, and is considered an advancement in building adaptive networks to suit these needs, while lowering operating costs.

Due to this technology being extremely new, there are only a few OEMs in the market that offer practical SD-WAN solutions, either as a stand-alone product (deployed by the end user via a reseller) or as a fully managed service by an integrator, also a channel partner of the OEM.

It is, therefore, imperative that, as a customer, an organisation needs a very clear understanding of what it wants the SD-WAN solution to deliver.

Legacy MPLS was standards driven and all service providers delivered the same basic service, with the differentiating factors being based on the capability of the service provider (i.e. services like reporting or capabilities like network footprint). The main differentiator between MPLS and SD-WAN is how SD-WAN is configured.

The challenge that prospective customers (service providers or enterprise end users) face related to SD-WAN is that there is no 'standard' implementation across the industry. Different approaches are also adopted related to last mile technologies that influence the optimal tuning of each circuit. The market does, however, expect SD-WAN to be a cheaper alternative to MPLS and one that offers more functionality.

One of the key benefits of deploying an SD-WAN solution is the reduction of operating costs. We typically see that a cost reduction of up to 40% is achieved, but this figure carries the mandatory 'terms and conditions apply' warning as the savings realised depend on a multitude of factors, least of which is the brand of the SD-WAN product.

Another key benefit is agility, in terms of rapid deployment. This is especially the case in the small office space within any industry and where the customer's core applications are already web-friendly. It is not so much about the technology, but more related to system deployments and how they are adapted to leverage SDN capabilities.

Organisations also need to keep in mind that larger enterprise environments will find it more difficult to deploy SD-WAN due to the operational silos of IT/Networking and Security. It is crucial to blueprint security into the SD-WAN design as direct Internet access from the network periphery bypasses the traditional centralised security controls.

SD-WAN works well with smaller businesses that already have workloads in the cloud, where benefits can be quickly realised. This is also where the different OEM products and tool sets will position themselves as differentiators in the market to meet the needs of their customers.

It should also be mentioned that caution must be applied to the OEM messages around SD-WAN and customers should understand the context of these messages. They are very "use case" specific. It is important to have a clear understanding of what the benefit is that the OEM provides.

Another issue to consider is how a specific OEM's product will fit into your environment, while also understanding your own cloud roadmap.

Successful SD-WAN deployments typically stem from cases where customers knew where they were going and identified SD-WAN building blocks to take them there. The effort spent around analysing the use case and cost benefit was carefully evaluated – so, don't be taken in by the hype.

* By Louis Kirstein, DSM Expert: Connectivity Services at T-Systems South Africa.


Global blockchain alliance to support Africa's aviation parts industry Published on 18 February 2020

Stakeholders in Maintenance, Repair and Overhaul (MRO) chain to demonstrate how technology can be used to digitally manage parts.

Online publishing platforms - local accounting journal provides a case in point Published on 14 February 2020

SAJAAR, the official scientific research journal of the Southern African Institute of Government Auditors, found a reliable and practical online publishing solution in Sabinet.

AI set to enhance customer experience Published on 25 February 2020

Although AI will undoubtedly have a major effect on many areas of the business, such as training, HR, sales and marketing, its application in customer experience will be particularly useful.

Critical steps to delivering an Industry 4.0 factory and supply chain Published on 13 February 2020

Agility must be delivered not only on the factory floor but throughout the entire supply chain, hence the importance of upskilling the youth and other industry players says Baljeet Nagi ECEMEA SCM Strategy Leader at Oracle.